Epoxy Ceramic Tile Grout

First of all, epoxy grout for marble tiles is a very popular choice. It has excellent adhesion and waterproof properties, can fit the marble surface tightly, and prevents water vapor from penetrating. Epoxy resin grout has various colors, can match various marble colors, and has corrosion and wear resistance. In addition, it is not easy to get dirty, easy to clean and maintains beauty for a long time.

As we all know, laying tiles is a must-do decoration project, and caulking tiles is a must-do step in the paving of tiles. So, why are there regular gaps left after the tiles are laid? The reason is that in order to prevent damage caused by thermal expansion and contraction, a certain gap must be left between each brick. Another reason is that it is difficult to achieve complete bonding when paving tiles. Therefore, if these gaps are not filled, water will leak in, or a lot of dirt will accumulate, which will cause the tiles to be easily damaged and warped, not only affecting the beauty but also destroying the firmness of the overall structure. Therefore, we need to use a special epoxy ceramic tile grout to fill the gaps in the tiles.

Therefore, in order to better fill the gaps in the tiles and provide durable, wear-resistant and beautiful effects, we have launched this two-group epoxy ceramic tile grout.

What is the advantage of epoxy ceramic tile grout?

1. Natural resin, relatively environmentally friendly and healthy, and has passed the French A+ certification.

2. Fast molding, not easy to soften, not easy to crack and fall off, and long life.

3. High hardness, wear-resistant and old-resistant, long-lasting as new.

4. High viscosity, not easy to sag, not easy to collapse, suitable for both walls and floors.

5. Heat-resistant, cold-resistant, not afraid of thermal expansion and contraction, especially suitable for floor heating rooms.

6. Waterproof and mildew-proof, daily care saves time and effort.

7. Bright colors, long-lasting, not easy to turn yellow, not easy to fade.

Convenient construction, glue, press seams, and scrape glue, you can easily get started by yourself, saving construction expenses.

The construction method of epoxy ceramic tile grout:

1. First wipe the dust, stains, crosses and other waste on the surface of the tile and the gaps between the tiles.

2. Load the grout into the grout gun, insert the mixing tube, and cut the tube mouth according to the size of the tile gap.

3. Squeeze the tube to fully mix the two materials and squeeze out about 30cm.

4. Use the squeeze gun to squeeze the slurry into the reserved gaps between each brick, making sure it is completely filled without any gaps;

5. Use a press ball to press the grout.

6. Wait for about 8-24 hours before removing the excess grout and wiping the masonry surface with a sponge or clean cotton cloth.

Hot Tags: epoxy ceramic tile grout, China epoxy ceramic tile grout manufacturers, suppliers, factory, Light Gray epoxy grout tube, Epoxy tile grout various colours, Noble Gold epoxy grout, tile epoxy and grout, Metal Gray epoxy grout tube, epoxy grout light grey