Before installing square tile edge trim, you need to prepare the following materials and tools:
Materials:
Tile edge trim (metal, plastic, or other materials), tile adhesive, grout or grout, tile spacers
Tools:
Notched spatula, rubber mallet, tile cutter or saw, tape measure, pencil or marker, caulking gun or caulking paste, wet sponge or rag.
When installing square edge tile trim, you need to keep a few things in mind to ensure a successful and seamless installation. Here are some tips and steps:
1. Choose the right tile trim: Square edge tile trim is available in a variety of materials, including brass, stainless steel, aluminum alloy, PVC, and marble&Plastic. When choosing the type of tile trim, try to choose a high-quality product to avoid problems with fragility after installation. Choose a tile trim that matches the color and texture of the tile and makes sure it has a straight square tile profile.
2. Determine the location: Before installing the tile corner trim, determine where to install the tile edge trim. Generally, you need to place it at the edge of the tile installation, where the tile meets the wall or other surface.
3. Measure and cut: Use a tape measure to determine the required length of each square edge tile trim and mark it with a marker. Use a tile cutter or hacksaw to cut the molding to size. This step is to ensure that the trim strips are cut at the correct length and angle for the installation.
4. Install the tiles: Begin laying the tiles, leaving about 1/8 inch gaps between each tile to accommodate the thickness of the tile profiles. You can use tile spacers to ensure even spacing and use a rubber mallet to hammer the tiles to make them fit tightly and carefully.
5. Apply adhesive: Apply a thin layer of tile adhesive to the back of the box tile trim, using a notched spatula to evenly cover it.
6. Press the molding: Carefully press the box tile trim into place, making sure it is flush with the surrounding tiles. Use a level to check for evenness if necessary.
7. Apply grout: Once the adhesive has dried, it is best to professionally close any gaps between the tile and the box tile trim using caulk or grout. Apply grout to the gaps between the tile and the box edge tile trim, using a grout spatula to press the mixture into the gaps. Wipe away any excess grout with a damp sponge.
8. Finish: Allow approximately 24 to 48 hours for the grout to dry completely, then buff the tile and square tile edging strip with a clean cloth. Enjoy your newly installed tile and square edge tile trim!
Share this post
Leah Liu
Hello there! I am Leah. I have worked in the building materials industry for over 10 years. I want to share my experience here - let us make progress together!