1. Determine installation position: Before installing the corner lines of the floor tiles, it is necessary to determine their installation position. This can be achieved by pulling a rope in the center of the ground to determine the installation position of the corner lines.
2. Measurement of length: Use a tape measure to measure the length of the corner line that needs to be installed according to the determined position.
3. Cutting edge lines: Use scissors or chainsaws to cut the edge lines to the desired length.
4. Install the corner line: First, drill out the screw hole, and then use screws to screw the corner line in the appropriate position, paying attention to the depth and angle of the screws.
5. Remove excess parts: After installing the corner lines, use pointed pliers to cut off excess screws.
6. Overall cleaning: After installation is completed, clean the ground as a whole to ensure that there are no foreign objects around the installation edges and corners, so as not to affect the use and aesthetics of the edges and corners.
7. Measurement and installation of the next section: Measure and install the next corner line according to the above steps, ensuring that the length and angle of each corner line are equal, making it overall beautiful.
Share this post
Leah Liu
Hello there! I am Leah. I have worked in the building materials industry for over 10 years. I want to share my experience here - let us make progress together!