Ghonor New Product Launch

The function of expansion joints is to prevent cracks in buildings caused by climate change.

Expansion joints, also known as temperature joints, are made by reserving gaps at regular intervals along the length direction of the building

Expansion joints are continuously installed in areas where stress is relatively concentrated in buildings and structures

Expansion joint refers to a construction joint set at an appropriate location along the direction of the construction joint of a building or struct...

Construction workers will reserve a gap of about 10mm around the floor during decoration to cope with varying degrees of arching caused by seasonal...

The maximum gap between the skirting line and the floor should be less than 3mm. Use a 1 yuan coin to insert it. If it is inserted more than 2 time...

In the past, when decorating, the height of the baseboard was usually around 10 centimeters.

There are two main ways to choose the color of ceramic tile skirting lines: one is proximity method, and the other is contrast method.

The most commonly used skirting lines for ceramic tiles are mainly divided into ceramic skirting lines, glass skirting lines

Before drilling, observe the wiring direction of water and electricity to prevent errors.

Skirting line is a specialized term used in decoration. In living room design, the corner lines, waistlines, and skirting lines play a visual balan...

Place the buckle on the positioning ruler, press against the wall root, press down on the upper end of the buckle with your fingers